Hdd Management; Alarm Setup; Info - Night Owl FS84500 Instruction Manual

5.2.11.1 Alarm Setup

VIDEO LOSS: Set this to ON if you would like to trigger the alarm when any of the camera
signal is distorted or loss.
ALARM MANAGE OUTPUT: Option for the duration of the external alarm after an alarm is
triggered (Not Applicable for this particular series of machines).
BUZZER: Option for the duration of the built in buzzer after an alarm is triggered
Post Alarm Recording: If "Motion Detect" recording is enabled, this option controls the
duration of the recording time after the motion has stopped.
EMAIL SETUP: There is also an option for the DVR to send an e-mail to a specific mails
box when the alarm is triggered. To enable this option, follow these steps:
5.2.11.2 System Information
To configure the Alarm mode of each channel,
click "Main Menu"  "ADVANCED"  "Alarm" to
enter into "ALARM SETUP" menu.
HDD LOSS: Set this to ON if you would like to
trigger the alarm when HDD is operating irregularly.
HDD SPACE: Set this to ON if you would like to
trigger the alarm when the "HDD Overwrite" option
is disabled and the HDD is full.
Click the "EMAIL SETUP" button under ALARM
SETUP.
Set the e-mail account information of your mail
server. Please contact your Network
Administrator for details and configuration
settings.
Click "MAIN"  "ADVANCED"  "INFO" to access
the system information of your DVR.
28
User's Manual