MasterCool 52325 Quick Start Manual

3. COLOR PALETTE
SETTING UP YOUR THERMAL IMAGER
INSTALLING THE MICRO SD CARD
Before you begin to use your thermal imaging camera, a microSD card must be inserted.
A microSD card is a memory device that allows you to store images recorded by your
thermal imaging camera. Please follow the steps below to insert the microSD card.
PLEASE NOTE: You can easily damage the microSD card by improper operation. Please be
careful when inserting, removing, or handling the microSD card.
On one side of your thermal imaging camera there is
a rubber plug protecting the microSD slot and the USB
connector from dust and damage. Please pull it up
slightly and gently, and turn it 90° clockwise.
1. Insert the microSD card and push it all the way inside
the slot until you hear a "click", the microSD card is
now locked in place.
2. Once the microSD card is installed, place the rubber
plug back to secure the area against damage.
BASIC OPERATION
4. Power Off: Press the POWER [
power off time is about 1 minute. (Please see the FUNCTIONS section to learn how to
adjust the auto off time.)
FUNCTIONS
• Display Mode: Press MODE [
(Fusion-Thermal-Visual) Note: Fusion is the default mode.
• Color Palettes: Press COLOR PALETTE [
(4 selectable color palettes).
IRONBOW
Press COLOR PALETTE [
of the fixed range mode is
TRIGGER (11) while scanning.
• °C/°F: Press UNIT [
• Display Functions: Press MENU [
chart below, then press the COLOR PALETTE [
select the function. Press the UNIT [
TRIGGER (11) to select or confirm it.
Cursor Measurement
Brightness
Fusion Ratio
3
52325 THERMAL IMAGING CAMERA
1. LCD
6. MENU
4. MODE
Push
1. Power On: Press the POWER
2. Taking a thermal image and temperature: After powering on,
simply aim at the measure target with the INFRARED LENS (10)
to get the fusion images and temperature immediately.
Please make sure the target area is within the field of view.
Note: There is a cursor on the screen. The cursor shows the
temperature of the object located in the middle of the screen.
3. Save Images: Press the TRIGGER (11) to save the thermal
image to the micro SD card.
] key (2) for more than 3 sec. to power off the unit. Auto
] key (4) to switch the display mode.
RAINBOW HIGH CONTRAST
] key (3) for 3 seconds to enter the fixed range mode (the icon
III
) After that, the user can fix the range by pressing the
˚C
] key (5) to convert temperature unit.
˚F
The cursor shows the temperature of the object located in
the middle of the screen.
Hide the cursor measurement
3-level brightness:
Fusion images by 3-level ratio of combining thermal and
visual images.
> >
1 2
www.mastercool.com
10. INFRARED LENS
9. VISIBLE CAMERA
7. MICRO SD
11. TRIGGER
2. POWER KEY
12. BATTERY COVER
microSD
it all the
", and
] key (3) to select the color palette,
III
] key (6) for the display functions featured in the
] key (3) or MODE [
III
˚C
] key (5) to set the function and then press the
˚F
Low
( is the default mode)
3 3
33˚
33˚
8. MINI USB
5. UNIT
card
way
the
locked
key (2) to power on the unit.
GRAY SCALE
Medium High
] key (4) to
1