MasterCool 52325 Manual

3. COLOR PALETTE
p e r a t i n g M a
p e r a t i n g M a
SETTING UP YOUR THERMAL IMAGER
INSTALLING THE MICRO SD CARD
Before you begin to use your thermal imaging camera, a microSD card must be inserted.
A microSD card is a memory device that allows you to store images recorded by your
thermal imaging camera. Please follow the steps below to insert the microSD card.
PLEASE NOTE: You can easily damage the microSD card by improper operation. Please be
careful when inserting, removing, or handling the microSD card.
On one side of your thermal imaging camera there is
a rubber plug protecting the microSD slot and the USB
connector from dust and damage. Please pull it up
slightly and gently, and turn it 90° clockwise.
1. Insert the microSD card and push it all the way inside
the slot until you hear a "click", the microSD card is
now locked in place.
2. Once the microSD card is installed, place the rubber
plug back to secure the area against damage.
BASIC OPERATION
4. Power Off: Press the POWER [
power off time is about 1 minute. (Please see the FUNCTIONS section to learn how to
adjust the auto off time.)
FUNCTIONS
• Display Mode: Press MODE [
(Fusion-Thermal-Visual) Note: Fusion is the default mode.
• Color Palettes: Press COLOR PALETTE [
Color palettes
(4 selectable color palettes).
Press Color Palette Key (
Ironbow
IRONBOW
Press COLOR PALETTE [
C/°F/K
of the fixed range mode is
Press Unit Key (
TRIGGER (11) while scanning.
Power off
• °C/°F: Press UNIT [
Press Mode Key (
• Display Functions: Press MENU [
chart below, then press the COLOR PALETTE [
select the function. Press the UNIT [
TRIGGER (11) to select or confirm it.
Cursor Measurement
The default emissivity is 0.95, or select other default emissivity: Matt:0.95, Semi-m
Emissivity Glossy:0.3
Select Set value to adjust the emissivity (0.1 to 1 step .01).
Brightness
HAL
You can select Set Min temp or Set Max item to adjust the High Alarm (HAL)
Fusion Ratio
3
(step .1).
LAL
Selectable Chinese or English.
Language
52325 THERMAL IMAGING CAMERA
1. LCD
Installing the microSD card
6. MENU
Before you begin to use your TIM, a microSD card must be ins
microSD card is a memory device that allows you to store ima
videos recorded by your TIM. There is an 8GB microSD card includ
product package. Please follow the steps below to insert the
card.
1. Please
4. MODE
remove it from its package.
n u a l f o r T I M 0
n u a l f o r T I M
On one side of your TIM there is a rubber plug
protecting
connector from dust and damage. Please pull it
up
clockwise.
2. Insert
with
towards the slot, and the
white
toward the screen.
Push
inside the slot until you
hear
microSD card is now locked
in place.
3. Once the microSD card is installed
place
1. Power On: Press the POWER secure the area against damage.
2. Taking a thermal image and temperature: After powering on,
simply aim at the measure target with the INFRARED LENS (10)
1.
to get the fusion images and temperature immediately.
Please make sure the target area is within the field of view.
2.
Note: There is a cursor on the screen. The cursor shows the
temperature of the object located in the middle of the screen.
3. Save Images: Press the TRIGGER (11) to save the thermal
image to the micro SD card.
3.
) to select the color palette (4 selectable color palettes) to view therma
6
Rainbow
RAINBOW
III ] key (3) for 3 seconds to enter the fixed range mode (the icon
) After that, the user can fix the range by pressing the
) for C °F or K transferred.
5
˚C
] key (5) to convert temperature unit.
) for more than 5 sec. to power off the unit. Auto power off time is around 30
2
˚F
) for scrolling more display functions, then press Up key (
2
) to confirm it.
10
The cursor shows the temperature of the object located in
the middle of the screen.
Hide the cursor measurement
3-level brightness:
Fusion images by 3-level ratio of combining thermal and
visual images.
>
1
9. VISIBLE CAMERA
SECTION 1: Setting Up your TERMAL IMAGER(TIM)
11. TRIGGER
identify
2. POWER KEY
3 T h e r m a l I
0 3 T h e r m a l I
12. BATTERY COVER
You can easily damage the microSD
card by improper operation.
Please be careful when inserting,
removing, or handling the microSD
card.
the microSD
slightly and
the microSD
the narrow
lettering
it all the
a "click",
the rubber
Power on
Press Mode Key (
Taking a thermal image and temperature
After power on, simply aim the thermal imager camera at the
( ) and get the thermal image and temperature immediate
9
target area is within the field of view.
Note: There are three cursors on the screen. The cross sign
] key (2) for more than 3 sec. to power off the unit. Auto
the object located in the middle of the screen. Other two m
highest and lowest temperatures in the thermal image.
Save thermal images
Press Trigger (
10
] key (4) to switch the display mode.
Down Key ( ) to show the saved images. Press Mode Key
4
measurement screen.
] key (3) to select the color palette,
III
High contrast
HIGH CONTRAST
] key (6) for the display functions featured in the
III ] key (3) or MODE [
˚C
] key (5) to set the function and then press the
˚F
Low
> ( is the default mode)
2 3 3
www.mastercool.com
10. INFRARED LENS
33˚
33˚
8. MINI USB
7. MICRO SD
5. UNIT
the 8GB microSD
m a g e r C a m e
m a g e r C a m e
slot and
gently, and turn
card
side
facing
way
and the
* IP54 Splash Proof
plug back to
key (2) to power on the unit.
) or Trigger (
2 10
) to save the thermal image to the micro SD
Grayscale
GRAY SCALE
Medium
card, and
r a
r a
the USB
it 90°
microSD
card slot
) to power on the unit.
] key (4) to
) or Dow
3
High
Ru
Pl
1