Status Light - Nextel iM1100 User Manual

Removing and Replacing a SIM Card
To remove the SIM card (see Figure 3):
1. Remove the iM1100 Wireless Modem from your laptop and turn it
over, so that the antenna is positioned in the upper right corner.
2. Slide the SIM card out of its slot by inserting a ballpoint pen in the
slot to the left of the SIM card and gently pushing the SIM card out,
to the right.
3. Once the SIM card has been pushed out, gently hold the two sides
with your fingers and take out the SIM card.
To replace the SIM card (see Figure 3):
1. Turn the unit over, so that the antenna is positioned in the upper right
corner.
2. Gently insert the SIM card with the gold contacts facing down and
the clipped corner in the upper right corner.
3. Gently push the SIM card in until it stops moving.

Status Light

The LED status light, located on the front panel of the iM1100 Wireless
Modem, indicates the service state of your modem.
iM1100 Wireless Modem Hardware
Figure 3. SIM Card
5