Displaying Your Private Id; Using The Private/Group Speaker; Turning The Speaker On; Turning The Speaker Off - Motorola iDEN i500plus User Manual

Displaying Your Private ID

Press * then # then 2.

Using the Private/Group Speaker

You can enable or disable the speaker on your i500plus phone for
Direct Connect use. When the speaker is on, the caller's voice can be
heard over the speaker. When the speaker is off, the caller's voice can
only be heard through the earpiece of your phone.

Turning the Speaker On

Press k.

Turning the Speaker Off

Press k. p will appear on your display. A brief alert tone will
notify you of incoming Private or Group calls.

Placing Private Calls

From Private Mode, there are also two ways to reach an individual
using Direct Connect. You can enter the person's Private ID number
then press the Push-To-Talk button. Or, you can store the person's name
and private ID number, then recall the number from a stored list.
Whether you dial the person's private ID directly or store it in a list—
you must have the individual's private ID to use Direct Connect. To
learn how to store names and numbers, see "Storing Names and
Numbers" on page 16 if you haven't done so already.

Entering the Private ID

Press m
1
Enter the Private ID.
2
Press and hold the Push-To-Talk button on the side of the phone
3
to talk. Both phones will chirp before your voice can be heard.
Release the Push-To-Talk button to listen.
4
58
until you see Prvt Ready.
www.nextel.com