Logic; Single Point Generic Control 8 Signals - ABB Relion 650 Series Product Manual

Breaker protection REQ650
Version 1.1 IEC
Single point generic control 8 signals SPC8GGIO
The Single point generic control 8 signals (SPC8GGIO)
function block is a collection of 8 single point
commands, designed to bring in commands from
REMOTE (SCADA) to those parts of the logic
configuration that do not need extensive command
receiving functionality (for example, SCSWI). In this way,
simple commands can be sent directly to the IED
outputs, without confirmation. Confirmation (status) of
the result of the commands is supposed to be achieved
by other means, such as binary inputs and SPGGIO
function blocks. The commands can be pulsed or steady.
AutomationBits AUTOBITS
The Automation bits function (AUTOBITS) is used to
configure the DNP3 protocol command handling.

9. Logic

Tripping logic SMPPTRC
A function block for protection tripping is provided for
each circuit breaker involved in the tripping of the fault.
It provides the pulse prolongation to ensure a trip pulse
of sufficient length, as well as all functionality necessary
for correct co-operation with autoreclosing functions.
The trip function block includes functionality for breaker
lock-out.
Tripping logic SPTPTRC
A function block for protection tripping is provided for
each circuit breaker involved in the tripping of the fault.
It provides the pulse prolongation to ensure a trip pulse
of sufficient length, as well as all functionality necessary
for correct cooperation with autoreclosing and
communication logic functions.
The trip function block includes functionality for
evolving faults and breaker lock-out.
Trip matrix logic TMAGGIO
Trip matrix logic TMAGGIO function is used to route trip
signals and other logical output signals to different
output contacts on the IED.
TMAGGIO output signals and the physical outputs allows
the user to adapt the signals to the physical tripping
outputs according to the specific application needs.
Configurable logic blocks
A number of logic blocks and timers are available for the
user to adapt the configuration to the specific
application needs.
• OR function block.
16
SEMOD176462-4 v5
SEMOD158591-5 v4
M12275-3 v4
GUID-258B03AB-5AA1-485B-A6C5-B6D45A841E25 v1
M15321-3 v7
M11396-4 v9
© Copyright 2011 ABB Power Grids. All rights reserved
• INVERTER function blocks that inverts the input
signal.
• PULSETIMER function block can be used, for example,
for pulse extensions or limiting of operation of
outputs.
• GATE function block is used for whether or not a
signal should be able to pass from the input to the
output.
• XOR function block.
• LOOPDELAY function block used to delay the output
signal one execution cycle.
• TIMERSET function has pick-up and drop-out delayed
outputs related to the input signal. The timer has a
settable time delay.
• AND function block.
• SRMEMORY function block is a flip-flop that can set or
reset an output from two inputs respectively. Each
block has two outputs where one is inverted. The
memory setting controls if the block should be reset
or return to the state before the interruption, after a
power interruption. Set input has priority.
• RSMEMORY function block is a flip-flop that can reset
or set an output from two inputs respectively. Each
block has two outputs where one is inverted. The
memory setting controls if the block should be reset
or return to the state before the interruption, after a
power interruption. Reset input has priority.
Boolean 16 to Integer conversion B16I
Boolean 16 to integer conversion function (B16I) is used
to transform a set of 16 binary (logical) signals into an
integer.
Boolean 16 to Integer conversion with logic node
representation B16IFCVI
Boolean 16 to integer conversion with logic node
representation function (B16IFCVI) is used to transform
a set of 16 binary (logical) signals into an integer.
Integer to Boolean 16 conversion IB16A
Integer to boolean 16 conversion function (IB16A) is
used to transform an integer into a set of 16 binary
(logical) signals.
Integer to Boolean 16 conversion with logic node
representation IB16FCVB
Integer to boolean conversion with logic node
representation function (IB16FCVB) is used to transform
an integer to 16 binary (logic) signals.
1MRK 505 269-BEN B
SEMOD175725-4 v3
SEMOD175781-4 v4
SEMOD158373-5 v3
SEMOD158421-5 v4
ABB Power Grids