Mig: Machine Setup (Gasless) - Viper SYNERGIC MIG165 Operating Manual

9. MIG: Machine Setup (Gasless)
1. Connect the polarity cable to the negative (-) dinse
connection, twist to lock in place.
3. Connect the MIG torch to the Euro connection, and
twist end to secure in place.
2. Connect the earth clamp to the positive (+) dinse
connection, twist to lock in place.
4. Connect the plug into a 10 AMP socket, then switch the
machine ON.
ON
OFF
13
VIPER MIG 165
OPERATING MANUAL
GAS IN