Setup Submenu: Security - EverFocus eIVP-EHL Series User Manual

Select panel type
Backlight Mode
Select backlight control signal type

3.6 Setup Submenu: Security

Change User/Administrator Password
You can set an Administrator Password or User Password. An Administrator Password must be set
before you can set a User Password. The password will be required during boot up, or when the user
enters the Setup utility. A User Password does not provide access to many of the features in the Setup
utility.
Select the password you wish to set, and press Enter. In the dialog box, enter your password (must be
between 3 and 20 letters or numbers). Press Enter and retype your password to confirm. Press Enter
again to set the password.
Removing the Password
Select the password you want to remove and enter the current password. At the next dialog box
press Enter to disable password protection.
BIOS & Application
Windows Slider Optimal Default, Failsafe Default
64
eIVP-EHL-AI-D0000
eIVP-EHL-IV-V0000