Table of Contents
Advertisement
eIVP-EHL-AI-D0000
eIVP-EHL-IV-V0000
3.2 AMI BIOS Setup
The AMI BIOS ROM has a pre-installed Setup program that allows users to modify basic
system configurations, which is stored in the batter y-backed CMOS RAM and BIOS NVRAM so
that the information is retained when the power is turned off.
To enter BIOS Setup, press <Del> or <ESC> immediately while your computer is
powering up.
The function for each interface can be found below.
Main – Date and time can be set here. Press <Tab> to switch between date elements
Advanced – Access hardware monitor and advanced board features, options
Chipset – Host bridge parameters
Boot – Enable/ Disable Quiet Boot option
Security – The setup administrator password can be set here
Save & Exit –Save your changes and exit the program
49
Advertisement
Table of Contents
