EverFocus eIVP-EHL Series User Manual page 3

Please read the following safety instructions carefully. It is advised that you keep this manual for future
references.
 All cautions and warnings on the device should be noted.
 All cables and adapters supplied by EverFocus are certified and in accordance with the material safety
laws and regulations of the country of sale. Do not use any cables or adapters not supplied by
EverFocus to prevent system malfunction or fires.
 Make sure the power source matches the power rating of the device.
 Position the power cord so that people cannot step on it. Do not place anything over the power cord.
 Always completely disconnect the power before working on the system's hardware.
 No connections should be made when the system is powered as a sudden rush of power may damage
sensitive electronic components.
 If the device is not to be used for a long time, disconnect it from the power supply to avoid damage by
transient over-voltage.
 Always disconnect this device from any AC supply before cleaning.
 While cleaning, use a damp cloth instead of liquid or spray detergents.
 Make sure the device is installed near a power outlet and is easily accessible.
 Keep this device away from humidity.
 Place the device on a solid surface during installation to prevent falls.
 Do not cover the openings on the device to ensure optimal heat dissipation.
 Watch out for high temperatures when the system is running.
 Do not touch the heat sink or heat spreader when the system is running.
 Never pour any liquid into the openings. This could cause fire or electric shock.
 As most electronic components are sensitive to static electrical charge, be sure to ground yourself to
prevent static charge when installing the internal components. Use a grounding wrist strap and
contain all electronic components in any static-shielded containers.
 If any of the following situations arises, please contact our service personnel (ts@everfocus.com.tw):
- Damaged power cord or plug
- Liquid intrusion to the device
- Exposure to moisture
- Device is not working as expected or in a manner as described in this manual
- The device is dropped or damaged
- Any obvious signs of damage displayed on the device
 DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES BEYOND
THE DEVICE'S PERMITTED STORAGE TEMPERATURES (SEE SPECIFICATION) TO PREVENT DAMAGE.
Safety Precautions