Table of Contents
Advertisement
11 Testing
Testing is a key discipline to master product related risks. The following tests have been performed.
Conformity with EMC Directive:
Tests have been done under the requirements specified in harmonized standards listed in chapter 9:
Conformity with PoE specifications:
In order to demonstrate conformity with PoE (Power on the Ethernet) standard the following test has been performed:
Isolation tests according EN 60950-1 Information technology equipment - Safety - Part 1: General requirements
12 Information on disposal and recycling
EU: Disposal according to the WEEE Directive 2012/19/EU
Do not dispose the IVAS-ETH into industrial waste! Electric and electronic devices that are no longer usable must be dis-
posed according to the requirements of the European WEEE Directive 2012/19/EU to ensure environmental protection and
reduction of waste by recycling of materials. For information and disposal in conformity with the WEEE Directive, please
ask a recycling service provider with certification in your country for support.
The IVAS-ETH does not contain any battery.
Non EU countries: Do not dispose of the device into household or industrial waste! The IVAS-ETH shall be sorted for environ-
mental-friendly recycling according to applicable regulation.
13 Regulatory information
13.1 Certification
IVAS Ethernet fulfils the essential requirements of the Directive 2011/65/EU (RoHS Directive) and of the Directive 2014/30/
EU (EMC Directive). It is certified for operation in the EU for the intended use conditions clarified in chapter 2.2.
The following harmonized EMC standards have been applied by taking the envelope of requirements.
EN61000-6-2:2005 Electromagnetic compatibility (EMC) - Generic standards - Immunity for industrial environments
EN61000-6-2:2016 Electromagnetic compatibility (EMC) - Generic standards - Immunity for industrial environments
EN50121-3-2:2016 Railway applications – Electromagnetic compatibility – Part 3-2: Rolling stock – Apparatus
EN12016:2013 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks – Immunity
(Note: accuracy of sensor data have not been monitored – not required with intended use as described in chapter 2.2)
EN50370-2:2003 Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
EN61000-6-3:2011 Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential,
commercial and light-industrial environments
EN61000-6-4:2011 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial
environments
EN61000-6-4:2017 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial
environments
EN12015:2014 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks
EN50370-1:2005 Electromagnetic compatibility (EMC). Product family standard for machine tools. Emission
30
Advertisement
Table of Contents
