QUICK START GUIDE
Specifications and Application
•
External Surge Protection Device (SPD) is required on all AC inputs.
•
Equipment Safety is Approved in UL1449/IEC 60664-1 Installation Category II environments up to 50°C ambient.For
rectifier input voltages above 266V
ambient above 40°C.
•
Equipment and subassembly ports:
1. Are suitable for connections to intra-building or unexposed wiring or cabling.
2. Can be connected to shielded intra-building cabling grounded at both ends.
•
Grounding / Bonding Network – Connect to an Isolated Ground Plane (Isolated Bonding Network) or an Integrated
Ground Plane (Mesh-Bonding Network or Common Bonding Network).
•
Installation Environment – Install where NEC applies.
Reference Documents
These documents are available at
Document Title
CC88815431
Pulsar Plus Controller Family Product Manual
8600228897P LM2500 125V Floor Mount Charger – Quick Start Guide "Charger A"
8600228917P
LM2500 125V Floor Mount Charger – Quick Start Guide "Charger B"
8600228918P LM2500 24V Floor Mount Charger – Quick Start Guide "Control, Fire & Gas"
Page 18
© 2021 ABB. All rights reserved.
, the maximum output current and power are derated by 2.8% per °C for operating
AC
abbpowerconversion.com