Soundcore Life Note 3S - True Wireless Earbuds Manual

Also See for Life Note 3S:

User manual (158 pages)

User manual (158 pages)

Table of Contents

Contents

1 Charging
2 Wearing
3 Powering On/Off
4 Bluetooth Pairing
5 Controls
6 Soundcore App
7 Reset
8 Specifications
9 Documents / Resources
- 9.1 References
- 9.2 Download manual

Soundcore Life Note 3S - True Wireless Earbuds Manual

Charging

Fully dry off the earbuds and the USB port before charging.
Use a certified USB-C charging cable and charger to prevent any damage.
Fully charge both the earbuds and the charging case before the first use.

Place the earbuds in the charging case and close it.
Connect the charging case to the power supply by using a USB-C charging cable. Alternatively, position the charging case at the center of your wireless charger for wireless charging.
→The LED indicator on the charging case indicates the charging status.

Wearing

Insert the earbuds into the inner canal of your ears and turn gently until you find the most comfortable and secure position.

Powering On/Off

Open the charging case, and the earbuds will automatically power on.
To power off, place the earbuds in the charging case and close it.
Powering On/Off

The earbuds will automatically power off after 30 minutes if no device is connected.

Bluetooth Pairing

Remove the sticker on the earbuds before first use.
Place the earbuds in the charging case and close it.
Open the charging case (no need to take out the earbuds), and the earbuds will automatically enter Bluetooth pairing mode.

The 3 LED indicators on the charging case will flash white in sequence continuously.

Select "Soundcore Life Note 3S" on your device's Bluetooth list to connect.
- When successfully connected, the 3 LED indicators will turn white for 3 seconds and then turn off.

Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter Bluetooth pairing mode, press and hold the button on the case for 3 seconds until the 3 LED indicators flash white in sequence continuously.
Auto pairing: Each time you power on your Soundcore earbuds, they will automatically connect to your last successfully connected device if available within the Bluetooth range.
Mono mode: When Bluetooth is connected, you can use either one of the earbuds by placing the other one into the charging case and closing it.
When powered on and connected, if either one of the earbuds is out of battery and powered off, you can keep using the other one.
Stereo mode to Mono mode: When you are on a call, place either one of the earbuds into the charging case, and the microphone in the other earbud will be activated.
Mono mode to Stereo mode: The unused earbud will be activated when taken out of the charging case. The ongoing phone call and music playback will not be affected.

Controls

Stereo Mode
Controls - Stereo Mode


Play/Pause	Tap twice (R)
Next track	Tap twice (L)

Answer a call	Tap twice (R/L)
End/Reject a call	Press and hold for 2 seconds (R/L)

Activate Siri or other voice assistant software	Press and hold for 2 seconds (R/L)

Mono Mode

Play/Pause	Tap twice
Answer a call
End/Reject a call	Press and hold for 2 seconds
Activate Siri or other voice assistant software

Soundcore App

Download the Soundcore app to enhance your experience.
User interface customization: In stereo mode, all of the controls (e.g. adjust volume, control playback, activate Siri) can be customized in the app.
EQ settings: There are more than 20 EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
Find Device: This feature allows the earbuds to start beeping and helps you locate them.
Superior Sleep: Use a mix of your favorite ambient sounds to improve sleep.
Gaming Mode: Turn on Gaming Mode to reduce latency and enhance the sounds of footsteps and voices.
Earbuds firmware upgrade: You will be informed once the new version of firmware is detected when you connect the earbuds with the app. Ensure the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed. During the upgrade, ensure the earbuds are being charged and avoid any operation.

Reset

You might need to reset the earbuds if you experience any connectivity problems or function issues.

Place the earbuds in the charging case and make sure they are being charged.
Leave the case open, press and hold the button on the case for 10 seconds until the 3 LED indicators flash white simultaneously 3 times. This confirms that the reset was successful and your earbuds can be connected normally.

Specifications

Specifications are subject to change without notice.

Input	5 V 0.7 A
Rated output power	5 mW
Battery capacity	40 mAh x 2 (earbuds); 800 mAh (charging case)
Charging time	3 hours
Playtime (varies by volume level and content)	Up to 5 hours (Total 35 hours with the charging case)
Driver size	13.4 mm
Frequency response	20 Hz - 20 kHz
Impedance	32 Ω
Waterproof level (Earbuds)	IPX4
Bluetooth version	5.2
Bluetooth range	12 m / 39 ft