Soundcore Life Dot 3i Quick Start Guide

SUPPORT

For FAQs, detailed user manual and more information, please visit www.soundcore.com/support

APP

Download the Soundcore App to customize the user interface (e.g. adjust volume, control playback, activate Siri), adjust EQ, switch ANC modes, update firmware, and explore more.

FIRMWARE UPGRADE

Ensure the earbuds are placed in the charging case and the case remains open until the firmware upgrade is completed.

AMBIENT SOUND

Switch ANC/Transparency/Normal modes in the Soundcore App.
* ANC (Active Noise Cancellation): Reduce unwanted background noise.
* Transparency: Stay aware of your surroundings while listening to music.

WEARING

Choose the EarTips that fit your ears best.

CHARGING

Fully dry off the USB charging port before charging.
Use a certified USB-C charging cable to prevent any damage.

POWERING ON/OFF

Open the charging case, the earbuds will automatically power on.
To power off, place the earbuds in the charging case and close it.

PAIRING

Remove the protective film from the earbuds, put them back in the case, and close the lid. Open the charging case, the earbuds will automatically enter Bluetooth pairing mode. Select "Soundcore Life Dot 3i" on your device's Bluetooth list to connect.

CONTROLS

x1: Press once
x2: Press twice
2s: Press and hold for 2 seconds

RE-PAIRING

Pairing with another device: Place the earbuds in the charging case and leave the case open. To enter pairing mode, press and hold the button on the case for 3 seconds until the LED indicator on the charging case flashes white.

RESET

Reset if the earbuds cannot properly pair with each other or with other devices._{Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the LED indicator on the charging case} flashes red 3 times. This confirms that the reset was successful and your earbuds can be connected normally.

LED LIGHT GUIDE

Steady white
Steady red
Flashing white
Flashing red

TIPS

Bluetooth Pairing:
For some smartphones, you may be requested to re-confirm the pairing on a pop-up window after you have selected "Soundcore Life Dot 3i" to pair.
Breaking Bluetooth Connection:
Turn off your Bluetooth device and turn it on again.
Remove "Soundcore Life Dot 3i" from your device's Bluetooth list.
Reset:
If you try to reset the earbuds, make sure that the earbuds are being charged in the case and leave the case open.

Customer Service
18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product.