Samsung HG43AT692U Install Manual page 20

Hide thumbs Also See for HG43AT692U:
Table of Contents

Advertisement

HDMI IN 1, 2, 3 (ARC)
Connects to the HDMI jack of a device with an HDMI output.
– No separate sound connection is needed for an HDMI to HDMI connection. HDMI connections carry both audio
and video.
– It is recommended that the external device of the HDMI 1.3 or 1.4 version will be used with this TV. If you meet
the compatible problem like no sound or the abnormal screen or etc with the device of the HDMI 1.2 version,
contact to the Samsung customer care centre.
ANT IN (SATELLITE), (AIR/CABLE)
– To view television channels correctly, the TV must receive a signal from one of the following sources:
– An outdoor antenna / A cable television system / A satellite receiver
LAN IN / LAN OUT
Connect to a wired LAN using CAT 7 (*STP type) cable.
* Shielded Twisted Pair
DATA
– Used to support data communication between the TV and the SBB or STB.
– Connects using RJ-12 TV type plugs.
COMPONENT IN / AV IN
– Use to connect to Component video / audio devices such as DVD players and AV (Composite) devices such as
VCRs.
– Connect audio cables to R-AUDIO-L on your TV and the other ends to corresponding audio out ports on AV
(Composite) devices.
– Connect component video cables (not supplied) to the component ports (PR, PB, Y) on your TV and the other
ends to corresponding component video out ports on a DVD player. Match the colours on the ports and cables.
– If you want to connect both a set-top box and a DVD player, you should connect the set-top box to the DVD and
connect the DVD to the component ports (PR, PB, Y) on your TV.
– The PR, PB and Y ports on your component devices (DVD) are sometimes labelled R-Y, B-Y and Y or Cr, Cb and
Y.
– For AV (Composite), connect RCA audio cables (not supplied) to R-AUDIO-L on your TV set and the other ends
to corresponding audio out ports on an external device.
– When your are connecting a AV (Composite) device to AV IN [Y/Video], connect the video cable (yellow) to the
AV IN [Y/VIDEO] port (green/yellow).
VOL-CTRL
Used to control the volume of the Bathroom speaker. Connect the Bathroom Wall Box and the VOL-CTRL port.
VARIABLE AUDIO OUT
Used for the audio output to the Bathroom speaker. Connect the Bathroom Wall Box and the VARIABLE AUDIO
OUT port.
English - 20

Advertisement

Table of Contents
loading

Table of Contents