Operation; Starting The Pressure Washer - KNOVA KN 9816 Manual

Electric high pressure washer
Table of Contents

Advertisement

Available languages

Available languages

OPERATION

Starting the pressure washer

Ensure that the unit is connected to an open water supply.
Ensure that the unit is connected lo a power supply.
Release the safety lock on the spray gun if it is still locked.
(see fig. F). Do not turn the unit's power supply on yet.
F
Blocked
trigger
To allow air trapped in the hose lo escape, press and hold
the trigger until a constant amount & water flows through the
hose.
Clean any dirt or foreign particles out of the outlet on the
spray gun and the coupling with the internal threading of the
spray wand.
Insert the spray wand into the spray gun's quick-connect cou-
pling by holding the spray wand firmly and turning it 900 to
secure it (sae fig. H).
Ensure that the spray wand locks into place.
H
Caution!
It the spray wand is not secured correctly, it could pop out of
place during operation of the spray gun due lo the high pres-
sure, causing damage or injury.
Press the trigger on the spray gun and put en your safety
goggles NOW.
Press the On/Off switch lo turn en the pressure washer (see
fig. J).
Direct the spray wand in the direction of the object you wish
to wash. Maintain a safe working distance.
Unblocked
trigger
High-pressure jet spray can be dangerous and cause injuries.
Do not aim the water spray at people or animals. Never aim
the jet spray at live electrical devices or at the pressure wash-
er itself.
Turning off the pressure washer
Release the trigger on the spray gun. Engage the safety lock.
The spray gun is now securely closed and cannot be operated
unintentionally (fig. F).
Move the On/Off switch to the off position (fig. J).
Stop the water inflow and remove the plug from the power
supply.
Detach the hose carrying the water first from the device, then
from toe water supply.
Caution!
90º
• Tendency to poor blood circulation (cold or numb fingers).
• Low temperatures. Wear warm gloves to protect your
hands.
• Holding the unit too tightly hinders blood circulation.
Take sufficient breaks when working for long periods of time.
When working with the pressure washer for long periods of
time or in the event of recurring symptoms (cold or numb fin-
gers), please consult a doctor.
WARNING NOTICE: :
J

Advertisement

Table of Contents
loading

Table of Contents