Storage; Reset Heater - Vornado AWRH Owner's Manual

STORAGE

During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
Cleaning is recommended before storage.
1. Unplug power cord and wrap around Cord Storage on bottom of
heater.
2. Cover, or place back in retail carton if available. This prevents the
heater from accumulating dust overtime.
3. Store heater in cool and
dry location.
DISPOSAL
Dispose of all packaging materials in an environmentally
responsible manner. Battery disposal — Always dispose of
batteries at a suitable recycling location.
14 English

RESET HEATER

RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multilevel safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked. If this happens, the safety shut-off system cuts
power to the heater and you must manually reset the heater.
1. Power heater off, then unplug power cord.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing heater to cool down.
4. Plug in power cord and place heater in desired position.
5. Touch Power button On. Your Vornado Heater should now function
normally and return to last stored setting.
Note: If the safety shut-off system repeatedly shuts off your heater
or if it will not reset after following the above procedure, call
Vornado Consumer Services Department toll-free at
1-800-234-0604.