Download Print this page

optris PIX Connect Operator's Manual page 11

Advertisement

1
IR image from the camera
2
Temperature profile: Shows the temperatures along max. 2 lines at any size and position in the image.
Control displays: Displays all temperature values in the defined measure areas like Cold Spots, Hot Spots, temperature at
cursor, internal temperature and chip temperature.
3
Alarm settings: Bar showing the defined temperature thresholds for low alarm value (blue arrow) and high alarm value (red
arrow). The color of numbers within control displays changes to
(when temp. below the low alarm value).
Temperature of measure area: Analyses the temperature according to the selected shape, e.g. average temperature of the
4
rectangle. The value is shown inside the IR image and the control displays.
5
Reference bar: Shows the scaling of temperature within the color palette.
6
Temperature time diagram: Shows the temperature curves over time for selectable region of interest (ROI)
7
Histogram: Shows the statistic distribution of single temperature values.
Automatic
/
manual
8
1σ : 1 Sigma, 3σ : 3 Sigma, OPT: Palette optimization
9
Distance function: Adjustment of the motor focus to focus the IR picture
10
Menu and Toolbar (Icons)
11
Icon enabling switching between color palettes
Status bar: Model and serial number, optic, temperature range, cursor position, device framerate/ display framerate,
12
emissivity, ambient temperature, flag status
scaling
of
the
palette
optris PIX Connect – E2021-05-A
red
(when temp. above the high alarm value) and to
(displayed
temperature
range):
Man.,
</>
(min,
blue
max),
11

Advertisement

loading
Need help?

Need help?

Do you have a question about the PIX Connect and is the answer not in the manual?