Loctite® High Viscosity Paste Pumptubes
Part Numbers
988530 (Carbon Steel 22:1, 44:1)
988532 ( Inert 22:1, 44:1)
988533 (Carbon Steel 64:1)
988535 (Inert 64:1)
988837 (Carbon Steel with Inert Seals 22:1, 44:1)
988840 (Carbon Steel with Inert seals 64:1)
IT IS THE RESPONSIBILITY OF THE OWNER AND/OR OPERATOR TO PROPERLY USE AND MAINTAIN THIS
EQUIPMENT. CAREFULLY READ AND UNDERSTAND THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL
BEFORE OPERATING THIS EQUIPMENT.
If the operator is not fluent in English, the instructions and warnings shall be read and discussed in the operator's native
language, making sure the operator comprehends the contents.
This equipment complies with OSHA Standards where applicable.
DO NOT exceed the stated maximum working pressure of the airmotor or of the lowest rated component in your system.
DO NOT alter or modify any part of this equipment.
DO NOT operate this equipment with combustible gas.
DO NOT attempt to repair or disassemble the equipment while the system is pressurized.
TIGHTEN all fluid connections securely before using this equipment.
ALWAYS read and follow the fluid manufacturer's recommendations regarding fluid compatibility, and the use of protective
clothing and equipment.
CHECK all equipment regularly and repair or replace worn or damaged parts immediately.
IMPORTANT: Failure to heed these warnings including misuse, overpressurizing, modifying parts, using incompatible
chemicals and fluids, or using worn or damaged parts, may result in equipment damage and/or serious personal injury,
fire, explosion, or property damage.
This manual contains IMPORTANT WARNINGS and INSTRUCTIONS. READ AND RETAIN FOR REFERENCE.
SEPT - 2004
Operation Manual AB988556
Copyright 2004
Printed in U.S.A.
EQUIPMENT
Form 403503