Assembly - Eastwood MP200i Assembly And Operating Instructions Manual

ASSEMBLY

FRONT WHEELS
• Pull Welder [A] from packaging, lift front end and support it securely.
• Using three M5 Nuts [bb] and Washers [cc], attach the Front Caster Assembly
[C] to the underside of the cabinet (FIG 1).
REAR WHEELS
• Lift and support the rear end of Welder [A].
• Use nine M5 x 12 Screws [aa] and Washers [cc]; five at the underside
(FIG 2), four at the rear (FIG 3) to attach the Rear Wheel/Tray Assembly [C]
to the underside and rear of the cabinet.
GAS CYLINDER BRACKETS
• With flanges facing downward, attach the two Gas Cylinder Brackets [D] to the
rear of the cabinet with three M5 x 12 mm Screws [aa] for each support (FIG 4).
To order parts and supplies: 800.343.9353 >> eastwood.com
FIG. 1 FIG. 1
FIG. 2 FIG. 2
FIG. 3 FIG. 3
   " " " "
   " " " "
FIG. 4 FIG. 4
Hidden from View Hidden from View
9