Advertisement
Table of Contents
Touch Evo Floor Stand
Getting started guide
1. Feed cable up through the
2. Slide the hinge pole onto the
3. Screw on baseplate with
.
4. Locate the Touch case and
5. Attach the Touch case to the
hinge pole. Ensure enough length
base pole while feeding the cable
screws with the charging cable
unscrew the
security screw to
hinge and screw in the
is fed through to easily plug into
through. Screw in
grub screws
running underneath.
remove the top bracket that holds
.
screws to secure.
your tablet.
to secure.
the adhesive.
6. Peel off the adhesive paper
8. Re-attach top bracket and
9. Plug in the charging cable.
7. Place the bracket in the center
from the top bracket.
secure with the security screw.
of the tablet and press down and
hold for 20 seconds.
DESIGNED FOR DIGITAL USE ONLY
Advertisement
Table of Contents
Related Manuals for Bosstab Touch Evo Floor Stand
Summary of Contents for Bosstab Touch Evo Floor Stand
- Page 1 Touch Evo Floor Stand Getting started guide 1. Feed cable up through the 2. Slide the hinge pole onto the 3. Screw on baseplate with 4. Locate the Touch case and 5. Attach the Touch case to the hinge pole. Ensure enough length...
- Page 2 Touch Evo Floor Stand Optional Extras Getting started guide Landscape Rotation Lock Portrait Rotation Lock Tilt Adjustment Lock Place case on the pole in a landscape Place case on the pole in a portrait Using Allen key provided, tighten screw...
Need help?
Do you have a question about the Touch Evo Floor Stand and is the answer not in the manual?
Questions and answers