Bosstab Edge Evo Getting Started Manual

Edge Evo Floor Stand
1. Feed cable up through the 2. Slide the hinge pole onto
hinge pole. Ensure enough the base pole while feeding
length is fed through to the cable through. Screw in
easily plug into your tablet.
6. If you are running a 7. Plug in the charging cable
charging cable through the and squeeze the tablet into the
stand, remove the cable cover clamp with the cable running
clip before step 7.
3. Screw on baseplate with
. screws with the charging
cable running underneath.
. grub screws to secure.
8. Re-attach the clamp arm by
sliding in and squeezing tablet.
behind the tablet.
Getting started guide
4. Locate the Edge case 5. Unlock the security lock
and attach to the hinge and with the L shape key and slide
screw in the screws
to secure.

Lock

9. Remain holding clamp
together until you have rotated
the security lock with the L
shape key into the lock position.

Unlock

the clamp out.
DESIGNED FOR DIGITAL USE ONLY