Bosstab Elite Evo Installation Manual

The Elite Evo
Installation Guide
Screw Mount (from above) instructions
1
Remove screws from case and lift
the case off the stand.
4
If you are running your charging
cable through the surface,
ensure to drill a larger hole to
feed cable through.
7
Place case back on the stand and
screw back in the 4 screws.
2
Lift base casing from the base
plate.
5
Screw down your stand through
the base plate using the wood
screws provided.
8
Unlock case with keys provided
and remove faceplate.
w ww.b o sstab.com
3
We recommend drilling pilot
holes to assist with screw base
mounting.
6
Press down the base casing over
the base plate.
9
Plug in your tablet while placing it
into the case and place faceplate
back on and lock.
1