Setting Up Wpa2-Psk Security - NETGEAR RangeMax WPN311 User Manual

NETGEAR RangeMax Wireless PCI Adapter WPN311 User Manual
Note: Larger encryption keys require more processing and may slow the
communications response times.
4. Select Create with Passphrase and enter the passphrase. The Smart Wizard automatically
generates the WEP keys.
Note: The characters are case-sensitive. Be sure to use the same passphrase for all the
wireless devices in the network.
If the passphrase method is not available in the other devices, you must manually enter the
keys to match exactly what is in the access point and other 802.11b/g wireless devices.
5. Save your settings in a Profile.
a. Click the Save Profile button. All the configuration settings are saved in this profile.
b. Click Apply.
c. Click Close to exit the configuration utility.

Setting up WPA2-PSK Security

Follow the steps below to configure WPA2-PSK Security.
1. Run the WPN311 Smart Wizard.
a. Make sure the WPN311 software is installed and the WPN311 Wireless PCI Adapter is
properly installed in the PCI slot in your computer.
2-14
v3.0, January 2007