Assembly - Agri-Fab 45-03083 Owner's Manual

Agri-fab universal tow behind tiller owner's manual

Table of Contents

TO iNSTALL (WhEEL)

WEiGhTS TO TiLLER

NOTE: Weights are not furnished with the Tiller. 30 lb.

tractor wheel weights may be purchased to mount to the

Tiller if extra weight is required. (Refer to the Operation

section of this manual.)

• Remove two Carriage Bolts and Nuts from each Tine

Shield, located approximately 3-1/2" from the front

edge. See fig. 4.

• Place (Wheel) Weights on Tine Shield and secure with

long Bolts and Nuts furnished with the Weights. See

fig. 4.

ASSEMBLY

FiG. 4

Table of Contents