AURAFINA V4821D Assembly Manual

THE CABINETRY AND BATH COLLECTIONS
VANITY CABINET ASSEMBLY GUIDE
Item No: V4821D
WELCOME TO AURAFINA READY-TO-ASSEMBLE VANITIES
Thank you for purchasing an AURAFINA ready to assemble vanity. You are on your
way to a beautiful, new bathroom vanity. There are a few simple tools necessary, and
some set up of your preparation area before you get started.
Our vanities go together easily, but you may want to ask a friend for assistance
when putting together larger vanities. One of you can align the components while
the other screws them together. Once you get going, assembly gets easier as you
improve your learning curve! While DIY-ing just remember, by assembling your own
vanity, you are saving the thousands that companies charge for "semi-custom" built
in style vanities.
Equipment: Phillips Head screw driver, flat head screw driver, cordless electric drill with the flat
and Phillips attachment bits (not necessary, but is a time saver). and rubber mallet.
Prep Area: A dirt free carpet or the foam sheets and cardboard from your cabinet will provide
you with a scratch free cushioned work area. To save your back, working at table height is always
a good idea.
Unpack your AURAFINA vanity components and spread out the panels on your smooth prep
surface. Keep tools and the package of hardware screws, brackets, etc close by, but not under
any of the panels. Vanities ship with the hinges already secured to the door frame faces, making
installation quicker. We pre-mark all screw holes for easy acceptance of our hardware. All
hardware, mounting brackets, shelves, drawer pulls and screws (plus extra) are provided.
Hardware is packaged in plastic bags separately from the cabinet panels so there is no damage.
Dovetailed drawers can be tapped together using a rubber mallet.
1
PAGE
PREPARE VANITY FOR ASSEMBLY
R
www.AURAFINA.com