AURAFINA V2421 Assembly Manual

THE CABINETRY & BATH COLLECTIONS
VANITY CABINET ASSEMBLY GUIDE
Item No: V2421
WELCOME TO AURAFINA READY-TO-ASSEMBLE VANITIES
Thank you for purchasing an AURAFINA ready to assemble vanity. You are on your
way to a beautiful, new bathroom vanity. There are a few simple tools necessary, and
some set up of your preparation area before you get started. Our vanities go together
easily, but you may want to ask a friend for assistance when putting together larger
vanities. One of you can align the components while the other screws them together.
Once you get going, assembly gets easier as you improve your learning curve! By
assembling your own vanity, you are saving the thousands that companies charge for
"semi-custom" vanities.
Equipment: Phillips Head screw driver, at head screw driver, cordless electric drill with the at
and Phillips attachment bits (not necessary, but is a time saver). and rubber mallet.
Prep Area: A dirt free carpet or the foam sheets and cardboard from your cabinet will provide you
with a scratch free cushioned work area. To save your back, working at table height is always a
good idea.
Unpack your vanity components and spread out the panels on your smooth prep surface. Keep
tools and the package of hardware screws, brackets, etc close by, but not under any of the
panels. Vanities ship with the hinges already secured to the door frame faces, making installation
quicker. We pre-drill all holes for easy acceptance of our hardware. All hardware, mounting
brackets, shelves, drawer pulls and screws (plus extra) are provided. Hardware is packaged
separate from the cabinet panels so there is no damage. Dovetailed drawers can be tapped
together with a rubber mallet.
1
PAGE
PREPARE VANITY FOR ASSEMBLY
R
www.AURAFINA.com