Table of Contents
Advertisement
Installation (continued)
Groove
Adapter cover
Image with the adapter cover being attached
24 - ENGLISH
Power supply unit
Tabs
4) Close the connector secure lock.
z While the string is hooked onto the cover, push
until the tabs of the connector secure lock click
into place.
Take care not to trap the string with a tab.
z The string is for preventing the adapter cover
from falling off. Make sure it is attached to the
connector secure lock for use.
5) Attach the adapter cover.
z While aligning the protrusion at the bottom
centre of the adapter cover with the groove (i),
push the tabs on the left and right at the top of
the adapter cover into the holes until they click
into place (ii).
Take care not to trap the string in the adapter
cover.
Advertisement
Table of Contents
