Connecting One Device - NETGEAR ME101 User Manual

Connecting One Device

Note: If you want to connect multiple devices, see the procedure on page 6.
1. Turn off the gaming console or other Ethernet-enabled device.
2. Connect the provided Ethernet cable between the ME101 Wireless Bridge and the gaming
console or other Ethernet-enabled device.
3. Connect the power adapter to the wireless bridge and plug the power adapter in to a
power outlet. The Power
4. After you see the Wireless LAN light
Ethernet-enabled device.
If the bridge and the Ethernet-enabled device are successfully connected, the Network
light will light up. This light flashes when there is network activity.
Note: If your setup works with the default settings, you don't need to install the software
from the provided CD to configure the bridge unless you need to change the
Country/Region setting from the default setting (U.S.A.) or you have more than one
ME101 bridge on your network.
Default Ethernet DC in 5V Antenna
ME101 Wireless
Ethernet Bridge
and Wireless LAN
Gaming console or other
Ethernet-enabled device
lights should light up.
light up, turn on the gaming console or other
5