For Windows Nt4 Users Installing A Ma401 - NETGEAR MA401 Reference Manual

Reference Guide for the Model MA401 802.11b Wireless PC Card

For Windows NT4 Users Installing a MA401

If an earlier version of the Netgear MA401 Wireless PC
Note:
Card was previously installed on your notebook, you must
remove the old driver and utilities before you can install the new
PC Card and software.
Insert the MA401 PC Card into your computer.
Windows NT4 is not a plug-and-play operating system
Note:
and does not automatically detect and prompt you for
installation of the PC Card driver. The driver installation has to
be initiated manually.
Power on your notebook and let the operating system boot up
a.
completely.
Have the Windows NT4 operating system installation files handy.
b.
Windows NT needs these files to complete installation of new
network adapter hardware drivers.
Note: You may need to be logged on to NT4 with administrator
rights to complete the installation of new hardware to your PC.
Insert the Model MA401 Resource CD into your CD-ROM
c.
drive.
Locate an available PCMCIA or CardBus slot on the side of your
d.
notebook. If your notebook computer has two PCMCIA or
CardBus slots, the MA401 wireless PC Card can be inserted into
either slot.
Hold the PC Card with the Netgear logo facing up and insert it
e.
into the PC card slot.
Installing the MA401 802.11b Wireless PC Card 2-19