Detailed Infrastructure Mode Setup Instructions For Various Version Of Windows; For Windows Xp Users Installing A Ma401 - NETGEAR MA401 Reference Manual

Reference Guide for the Model MA401 802.11b Wireless PC Card
Detailed Infrastructure Mode Setup Instructions
for Various Version of Windows
If you have limited to moderate computer experience, use the procedure below
that corresponds to the version of Windows you are using.

For Windows XP Users Installing a MA401

If an earlier version of the Netgear MA401 Wireless PC
Note:
Card was previously installed on your notebook, you must
remove the old driver and utilities before you can install the new
PC Card and software.
Insert the MA401 PC Card into your computer.
Power on your notebook and let the operating system boot up
a.
completely.
Insert the Model MA401 Resource CD into your CD-ROM
b.
drive.
Locate an available PCMCIA or CardBus slot on the side of your
c.
notebook. If your notebook computer has two PCMCIA or CardBus
slots, the MA401 wireless PC Card can be inserted into either slot.
Hold the PC Card with the Netgear logo facing up and insert it into
d.
the PC card slot.
Installing the MA401 802.11b Wireless PC Card 2-7