Midi/audio control surface with motorized faders for production (43 pages)
Summary of Contents for ICON AIRMON PRO
Page 1
24-bit/96KHz Stereo (uncompressed) professional wireless monitor system...
Page 2
Important Safety Instructions 1. Read this manual thoroughly before using this unit. 2. Keep this manual for future reference. 3. Take notice of and comply with all warnings included in the user's manual or indicated on the appliance. 4. Follow all instructions included in this manual. 5.
Contents Introduction ....................4 What’s in the package? ................4 Register your ICON ProAudio product to your personal account .....5 Features ....................6 AirMon Pro: The Transmitter ..............7 AirMon Pro: The Receiver ................8 Set Up.......................9 Expansion ....................10 Using AirMon Pro..................11 Specifications ..................12...
Congratulations on your purchase of the ICON Pro Audio AirMon Pro, a 24-bit/96KHz Stereo (uncompressed) professional wireless monitor system. Designed and developed in Japan for the stage and live streaming, the AirMon Pro is a wireless monitoring system consisting of two modules; a transmitter and a receiver.
Register your ICON ProAudio product to your personal account 1. Check serial number of your device Please go to http:// iconproaudio.com/registration or scan the QR code below. Input your device’s serial number and the other information on the screen. Click “Submit”.
Features ● Sleek, super compact and stylish design ● Uncompressed digital transmission up to 24-bit/96KHz sampling rate ● 2.4GHz proprietary encryption technology for ultra-low latency for wireless transmission (less than 1.58ms) ● Infinitely expandable – use unlimited receivers per one transmitter ●...
AirMon Pro: The Transmitter Sampling rate indicators Signal received Battery life indicator Good Power Sampling Moderate on/off rate switch Recharge! Charging USB ‘C’ charging Channel Audio in port 3.5 mm port selector...
AirMon Pro: The Receiver Power on indicator Pairing indicator Sampling rate indicator Sampling rate switch Power on switch USB C charging port Volume Pairing switch Volume Reset How to reset the volume If you need to reset the volume to its default level, simply press ‘Reset’...
Set Up Pairing the Receiver and Transmitter. STEP ONE On the transmitter, select which channel you would like to broadcast on. Now, let’s decide which bandwidth you would like to select i.e. 32K, 48K or 96K. Select this on both units – make sure all units are off at this stage. Sample Rate Stereo/Mono Bit Rate...
Expansion Endless receivers can be used per one transmitter. Two transmitters can be used together and, depending on the Wi-Fi environment, a maximum of three transmitters can be used in the same location. Please note, that this is entirely dependent on the WiFi environment.
Simply plug in your 3.5mm cable into your sound source and then into the ‘in’ port of your AirMon Pro, (with the sound source being off/volume down). Ensure your AirMon Pro system is paired, (as described in the ‘Set Up’ section). Plug in your ear buds into the headphone jack of the AirMon Pro.
Pack the unit in its original packaging including end card and box. This is very important. If you have lost the packaging, please make sure you have packed the unit properly. ICON is not responsible for any damage that occurs due to non-factory packing.
Need help?
Do you have a question about the AIRMON PRO and is the answer not in the manual?
Questions and answers