RAPTURE ANACONDA User Manual page 5

OVERVIEW
1
2
3
1. Left mouse button
2. Centre wheel
3. Removable left side covers (2 pcs: one with three
control buttons, one with nine control buttons)
4. Right mouse button
5. Removable right side covers (2 pcs - each with a diffe-
rent shape to customize the final look of the mouse)
6. DPI+/DPI- button (resolution setting)
7. Optical sensor (located at the bottom of the mouse)
INSTRUCTIONS
Installation
Insert the USB-A connector into the USB-A port of your
computer.
The mouse is installed automatically so you can control
the mouse quickly and comfortably.
Software
You can download the advanced mouse setup software
using the QR code provided below.
www.alzashop.com/rapture-software
Resolution setting
You set the resolution of the mouse sensor with the DPI
4
+ and DPI- buttons, where with the DPI + button you
increase the sensor resolution and with the DPI- button
you decrease the sensor resolution. The default setting
5
is 3,600 DPI.
Each sensor resolution level has its own backlight
6
colour for the DPI+ and DPI- buttons.
Set level of the sensor
resolution
800 DPI
1,600 DPI
7
2,400 DPI
3,600 DPI
5,000 DPI
10,000 DPI
Interchangeable side covers
The mouse comes with two interchangeable left covers
and two interchangeable right covers. The covers can be
combined with each other.
Left side covers - cover with three control buttons
The right side covers are decorative covers, each with
a different shape and are used to customize the final
look of the mouse.
CLEANING
Keep the mouse clean. Before cleaning, disconnect the
USB-A connector from your computer.
USE only dry and clean cloth for cleaning. Do not use
harsh cleaners, solvents, gasoline or other similar sub-
stances. Never wash the mouse with water and do not
immerse it in water.
Color backlight
Red
Green
Blue
Orange
Purple
White
(forward/reverse/triple click)
- cover with nine control buttons
(forward/backward/throttle/ DPI lock/
buttons 1 to 5)
ENGLISH 5