Download Print this page

BRAND-MAN Rustler2 Owner's Manual

4 burner
Hide thumbs Also See for Rustler2:

Advertisement

Quick Links

WARNING
FOR YOUR SAFETY:
For Outdoor Use Only
(Outside any enclosure)
WARNING
FOR YOUR SAFETY:
• Improper Installation,
adjustment, alteration,
service or maintenance can
cause injury or property
damage.
• Read the installation,
operation, and maintenance
instructions thoroughly
before installing or
servicing this equipment.
• Failure to follow these
instruction could result
could cause property
damage, personal injury, or
death.
• This instruction manual
contains important
information necessry for
the proper assembly and
safe use of the appliance.
• Read and follow all
warnings and instructions
before assembling and
using the appliance.
• Follow all warnings and
instructions when using the
appliance.
• Keep this manual for future
reference.
WARNING
• Do NOT store or use
liquids or vapors in the
vicinity of this or any other
appliance.
• An LP cylinder not
connected for use shall
NOT be stored in the
vicinity of this or any
other appliance.
Rustler2 - 4Burner
Model# BG2211A4
Keep this manual for future reference.
This instruction manual contains important information necessary for the
proper assembly and safe use of the appliance.
Read and follow all warnings and instructions before assembling and using
the appliace.
Follow all warnings and instruction when using the appliance
DANGER
If you smell gas -
• Open lid.
• If odor continues, keep away from the appliance and
MD
Manufacturer:
H&H Asia Limited 27F, No 4013, Shennan Rd, Shenzhen, China

Advertisement

loading
Need help?

Need help?

Do you have a question about the Rustler2 and is the answer not in the manual?

Questions and answers

Summary of Contents for BRAND-MAN Rustler2

  • Page 1 Rustler2 - 4Burner Model# BG2211A4 WARNING FOR YOUR SAFETY: For Outdoor Use Only (Outside any enclosure) WARNING FOR YOUR SAFETY: • Improper Installation, adjustment, alteration, service or maintenance can cause injury or property damage. • Read the installation, operation, and maintenance...
  • Page 2 causing damage to property WARNINGS: This Barbecue is for outdoor use only, and should not be used in a building, garage or any other enclosed area. above is not followed exactly. For residential use only. This Barbecue is NOT for commercial use. - f l -s y This BBQ is not intended for and should never be used as a heater.
  • Page 3 Do NOT touch metal parts of Barbecue until they have completely Keep all electrical cords away from a hot Barbecue. cooled to avoid burns, unless you are wearing protective gear (pot After a period of storage and/or nonuse, check for leaks, burner holders, gloves, BBQ mittens, etc.) obstructions and inspect for any abrasion, wear or cuts to the hose.
  • Page 4: Expanded View

    Expanded View...
  • Page 5 PART LIST PICTURE QUANTITY ITEM DESCRIPTION BODY ASSEMBLY BOTTLE OPENER GREASE PAN GREASE CUP SUPPORT GREASE CUP HEAT SHIELD COOKING GRILL MAGNET HOTPLATE WARMING RACK PAPER TOWEL HOLDER LEFT SIDE SHELF RIGHT SIDE SHELF CART BOTTOM PANEL CASTOR GAS CYLINDER FIXTURE SUPPORT CART CYLINDER FIXTURE...
  • Page 6: Part List

    PART LIST QUANTITY PICTURE ITEM DESCRIPTION CART LEFT SIDE PANEL CART RIGHT SIDE PANEL CART BACK PANEL CART FRONT UPPER BEAM CART FRAME LEFT FIXTURE CART FRAME RIGHT FIXTURE CABINET INTERNAL PANEL 1 CART RIGHT DOOR PANEL CART LEFT DOOR PANEL HOTPLATE/ GRILL HOOK...
  • Page 7 PART LIST ITEM DESCRIPTION QUANTITY PICTURE LEFT CABINET DOOR LEFT CABINET SIDE PANEL SIDE DOOR STOPPER LEFT CABINET DOOR PIN SUPPORT SIDE CABINET DOOR HANDLE SIDE CABINET UPPER MAGNET PANEL SIDE CABINET SIDE MAGNET PANEL LEFT CABINET DOOR LEG SUPPORT LEFT CABINET DOOR SIDE BURNER RACK...
  • Page 8 FASTENERS ITEM DESCRIPTION QUANTITY PICTURE M6X12MM PHILIPS HEAD SCREW M4X12MM PHILIPS HEAD SCREW M6X40MM PHILIPS HEAD SCREW M6*40 Step screw M6 hexagon check nut Ø6.2* Ø16FLAT WASHER M4 STEPED PHILIPS HEAD SCREW M6X16MM PHILIPS HEAD SCREW Ø6.2 Spring washer Ø6.2* Ø10FLAT WASHER Wrench Screw Driver (NOT PROVIDED)
  • Page 9 ASSEMBLY INSTRUCTIONS DO NOT RETURN TO PLACE OF PURCHASE. Step 1 For assistance, call 1.855.200.8445 toll-free. Please have your owner’s manual and model number available for reference. Note: The model number is printed on a label which can be found on the cabinet door.
  • Page 10 a) Turn Cart Bottom Panel (14) o6er and attach Gas Cylinder Fixture Support (17) with two Step 2 screws (A). b) Insert Cart Cylinder Fixture (17) through rear edge of Cart Bottom Panel (14) and Gas Cylinder Fixed Support (16). c) Attach Left Bottom Cabinet Panel (36) to Cart Bottom Panel (14) with two screws (A).
  • Page 11 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Attach all eight Cast rs (15) onto the Cabinet Base Assembly prepared in Step 2, Step3 with four screws (H), four spring washer (K) and four flat washer (I) for each wheel as shown in the diagram the below. M6X16 ...32 PCS Ø6.2 Spring washer ...32 PCS Ø6.2*Ø10 FLAT WASHER ...32 PCS...
  • Page 12 a) Attach Cart Left Side Panel (19) and Cart Right Side Panel (20) onto the Step 5 Cart Bottom Panel (14) and secure with three screws (A) on each panel as shown in the diagram. M6X12 ...6 PCS Attach Cart Back Panel (21) between Cart Left Side Panel (19) and Cart Right Side Step 6 Panel (20) with two screws (B) on each side as shown in the diagram.
  • Page 13 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Insert two screws (C) through Cart Frame Left Fixture (23) and Cart Left Side Step 7 Panel (19) into Cart Front Upper Beam (22) and tighten screws. b) Repeat STEP a) for right side as shown in the diagram. Figure Figure 2 a) Attach the Cart Left Door (26) by inserting the bottom xed door pin into...
  • Page 14 ASSEMBLY INSTRUCTIONS (CONTINUE) Attach Cabinet Internal Panel 1 (25) to Cart Bottom Panel (14) with two screws (A). Step 9 Attach Cabinet Internal Panel 2 (29) to Cart Left Side Panel (19) with two screws (A). Secure both panels together with two screws (A) as shown in the diagram. a) Attach one Side Cabinet Back Panel (31) to the left rear side of Step 10 prepared frame assembly from with two screws (B).
  • Page 15 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Attach the Left Cabinet Side Panel (38) with four screws (B), two screws for the Step 11 bottom edge and two screws for the rear side edge. b) Repeat the same procedure for the Right Cabinet Side Panel (32) as shown in the diagram.
  • Page 16 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Attach Left Side Shelf (12) by partially fastening two screw (A) into left side of rebox Step 13 leaving screws extended by approximately ¼ inch. b) Align Left Side Shelf (12) onto extended screws. Press down on the Left Side Shelf (12) to lock it onto the screws.
  • Page 17 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Unscrew the side burner as shown in Figure 1. Step 15 b) Remove the side burner rack and side burner as shown in Figure 2. c) Attach the side burner nozzle onto the bracket under the Right Side Shelf as shown in Figure3. d) Re-assemble the side burner, ensure the side burner nozzle enters into the burner pipe and fix it as shown in Figure 5.
  • Page 18 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Install the Left Cabinet Door Pin Support (40) onto the front top side of the Left Cabinet Step 1 Side Panel (38) with two screws (A) as shown, b) Next install the Side Cabinet Down Side Door Magnet (43) on the front of the Left Cabinet Side Panel (38) with two screw (A) as shown.
  • Page 19 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Attach one Side Cabinet Door Handle (41) to bottom edge of Left cabinet Step 17 Door (45) with two screws (B) as shown in the diagram. b) Attach Left Cabinet Door Support (4 ) to Left Cabinet Door (45) with two screws (B).
  • Page 20 ASSEMBLY INSTRUCTIONS (CONTINUE) a) To open Left Cabinet Door (45) lift bottom of door up and unfold Left Cabinet Step 19 Door Leg (37) forming additional counter space. b)To close, fold the Leg (37) back and rest it on the Support (35) as shown in below diagram. a) Attach the remaining Side Cabinet door handle (41) to top edge of Right Step 20 Cabinet Door Panel (34) with two screws (B) as shown in the diagram.
  • Page 21 ASSEMBLY INSTRUCTIONS (CONTINUE) Step 21 the pre-drilled hole found in Right Cabinet Bottom Panel (30) b) Next press the spring door pin and slide into place as shown the diagram. a) Attach Grease Cup Support (4) onto the Grease Pan (3) with four screws (B) as shown. Step 22 b) P M4X12 ...4 PCS...
  • Page 22 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Insert the Grease Cup (5) into the Grease Cup Support (4) as shown in the diagram. Step 23 a) Open the barbecue hood and place the four (6) over the top of the burners. Step 24 b) I...
  • Page 23 ASSEMBLY INSTRUCTIONS (CONTINUE) a) Attach the (28) with one screw (A) in the right side cabinet as Step 25 shown in diagram. M6X12 ...1 PC...
  • Page 24 ASSEMBLY INSTRUCTIONS (CONTINUE) Step 26 a) Attach the paper towel holder assembly (11) with two screws (A) to the left side cabinet as shown in diagram. M6X12 ...2 PCS...
  • Page 25 a) Open the frame assembly doors and place the gas cylinder into the gas cylinder Step 27 b) Connect the regulator to the gas cylinder by tightening in a clockwise direction as shown in diagram.
  • Page 26 Seasoning Barbecue Step 28 CAUTION:Do NOT use corn oil as it contains a high level of sugar, which can carmelize and burn onto the surface.
  • Page 27 20 lb 9 kg CAUTION: LP gas tank must be properly disconnected and removed prior to moving this appliance Installing LP Gas Tank Disconnecting LP Gas Tank Figure 1 Burner Connections WARNING: Failure to inspect this connection or follow these serious bodily injury or damage to property.
  • Page 28 Figure 2 Checking For Leaks Figure 3 Operating Main Burners First Use Figure 4 Lighting...
  • Page 29 Figure 5 Important: CAUTION: in serious burns, bodily harm or other damage. Do NOT attempt to extinguish with water. Important: DO NOT Minimize Flare-ups: NOTE:...
  • Page 30 CAUTION: Notices Before Each Use: Figure 6 Burner Flame Conditions Cleaning Cart Surfaces Normal: Cleaning Main Burners Needs cleaning: Has to be replaced:...
  • Page 31: Before Storing

    Before Storing Seasoning Barbecue CAUTION: Do NOT use corn oil as it contains a high level of sugar, which can carmelize and burn onto the surface.
  • Page 32 First Use After Each Use Refurbish the Barbecue Surface...
  • Page 33 five (5)
  • Page 34 Problem Possible Cause Prevention/Cure Make sure regulator is securely attached to the LP gas tank per “Installing LP Gas Tank,” LP gas tank valve is closed then turn LP gas tank valve to “OPEN” LP gas tank low or empty 1.

This manual is also suitable for:

Bg2211a4