Sim Access Profile - Nokia RM-170 Manual

file:///C:/USERS/MODEServer/grawei/18212506/rm-170_siperia/en/issue_1/rm-170_siperia_en_1.xml file:///C:/USERS/MODEServer/grawei/18212506/rm-170_siperia/en/issue_1/rm-170_siperia_en_1.xml
3. Select Yes to make the connection between your
device and the other device automatic or
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to a paired device that is only
displayed in your device, scroll to the device with which
you have paired, and select
name.
To delete a pairing, select the device whose pairing you
want to delete and Options
pairings, select Options Delete
>
Tip: If you are currently connected to a device
and cancel the pairing with that device, pairing
is removed immediately, and the connection is
switched off.
Authorize a device
If you trust a paired device, you can allow it to connect
automatically to your device. You can select from the
following options:
Set as authorised — Connections between your
•
device and the other device can be made without
your knowledge. No separate acceptance or
authorization is needed. Use this status for your own
devices, such as your compatible headset or PC, or
devices that belong to someone you trust.
Set as unauthorised — Connection requests from the
•
other device must be accepted separately every
time.
Receive data
No to
If you want to receive data using Bluetooth, select
Bluetooth
>
all. When you receive data through Bluetooth
connectivity, a tone sounds, and you are asked if you
want to accept the message. If you accept, the message
is placed in the
Options Assign short
>
Tip: You can access the files in the device or on
the memory card using a compatible accessory
that supports the File Transfer Profile Client
> Delete. To delete all
service (for example, a laptop computer).
all.

SIM access profile

When the wireless device is in the remote SIM mode,
you can only use a compatible connected enhancement,
such as a car kit, to make or receive calls. Your wireless
device will not make any calls, except to the emergency
numbers programmed into your device, while in this
mode. To make calls from your device, you must first
leave the remote SIM mode. If the device has been
locked, enter the code to unlock it first.
With the SIM access profile, you can access the SIM card
of your device from a compatible car kit device. This
way, you do not need a separate SIM card to access SIM
card data and connect to the GSM network.
To use the SIM access profile, you need the following:
• Compatible car kit device that supports Bluetooth
wireless technology
• Valid SIM card in your device
Cyan Cyan Cyan Cyan Magenta Magenta Magenta Magenta Yellow Yellow Yellow Yellow Black Black Black Black
Page 53 Page 53 Jul 25, 2006 10:15:41 AM Jul 25, 2006 10:15:41 AM
On and My phone's visibility Shown to
>
Inbox folder in Messag.
53