Before Starting - HOMCOM AA1-056 Owner's/Operator's Manual

Before starting

WARNING: Remove all packaging and items from the display box. Make sure
the ignition switch is in the "OFF" position before assembling the scooter.
Estimated Assembly Time
● Allow up to 25 minutes for the assembly, not including the initial loading time.
● Allow a maximum of 8 hours for the initial charge.
Tools Required&Included:
1* 8mm / 10mm wrench (to adjust the Screw of the Rear Brake)
1* 13mm / 15mm wrench (to adjust the Screws of the Rear Wheel or to assemble the
Saddle)
2* 5mm hex wrench (to assemble the Front Wheel)
1* 2.5mm hex wrench (to adjust the Screw of the Accelerator )
1* 4mm hex wrench (only for the one with the plastic covers for belt and motor to remove)
1*Phillips (Screw Driver)
5