Riding The Scooter; Before Riding; Pre-Ride Checklist - Replay SPEEDSTAR ES-5520-1 Instruction Manual

lit, indicating the device is powered on.
Power Off: Press and hold the power button 2 seconds to turn off.

RIDING THE SCOOTER

Power on the scooter, you must first kick off the ground and then press the throttle
for the motor to start. To slow down the scooter, press the brake.
Note:
If the handlebars do not attach flush to the frame, you may need to shift the

location of your throttle and brake assembly appropriately.
 Tighten or loosen the throttle and brake assembly with a hex key and make
sure they are not touching or blocking your handlebars from being tightened
completely. Fully charge your scooter for up to 5 hours before using it for the
first time.
Before turning on the unit, ride it like a normal kick scooter to get comfortable

with the device.

BEFORE RIDING

It is important that you fully understand all elements of your scooter. If these
elements are not used correctly, you will not have full control of your scooter. Before
you ride, learn the functions of the various mechanisms on your scooter.
Practice using these elements of your scooter at slower speeds in a flat, open area
before taking the device out in public areas.

PRE-RIDE CHECKLIST

Ensure that your scooter is in proper working order each and every time you ride. If
a part of the scooter does not function correctly, please contact our customer support
center.
 Ensure the battery is fully charged before riding your scooter.
 Please wear all appropriate safety and protective gear as previously mentioned
in the instruction manual before operating your scooter.
9