Advertisement
Quick Links
<4-way air discharge cassette type>
Air-Discharge Direction Kit
MODEL: TCB-BC1602UE
• Thank you for purchasing the "Air-Discharge Direction Kit" of TOSHIBA Air Conditioner. Before starting the installation
work, please read this manual carefully and install the product properly.
• As for the "Safety precaution", please read the installation manual and the instruction manual for the 4-way air
discharge cassette type air conditioner (indoor unit) carefully, and also read the installation manual supplied with the
ceiling panel carefully.
• Please use this kit when controlling the air direction in 3-way or 2-way air flow depending on the installation location
status of the indoor unit.
1. Applicable models and Applications
MODEL
Applicable model
TCB-BC1602UE
SM56~SM160
2. Accessories (The following parts are attached.)
MODEL
Product name
Wind shield
TCB-BC1602UE
3. Installation methods
• Before installing the wind shield, change the air conditioner settings according to the procedures described on the back
of the page.
• Unless the setting is changed, the air blow temperature becomes low. This may cause the dew condensation.
Air Conditioner
INSTALLATION MANUAL
· Controlling the blockage of 3-way or 2-way air flow.
Dimensions (mm)
A
480×80×40
B
400×80×40
C
400×80×40
Packing
460×110×2
Application
CAUTION
– 1 –
Shape
Q'ty
EN
1
1
1
2
1-EN
Advertisement
Related Manuals for Toshiba TCB-BC1602UE
Summary of Contents for Toshiba TCB-BC1602UE
- Page 1 Air-Discharge Direction Kit MODEL: TCB-BC1602UE • Thank you for purchasing the “Air-Discharge Direction Kit” of TOSHIBA Air Conditioner. Before starting the installation work, please read this manual carefully and install the product properly. • As for the “Safety precaution”, please read the installation manual and the instruction manual for the 4-way air discharge cassette type air conditioner (indoor unit) carefully, and also read the installation manual supplied with the ceiling panel carefully.
- Page 2 Installing the wind shield(s) and packings • Attach the wind shields to the air flow openings (made of styrene foam) of the indoor unit and place the packings on them to block the air flow. (Refer to Figs. 1 to 3.) •...
- Page 3 Installing the indoor unit (Continued) • The blockage portions of the air flow outlet are specified depending on the models. Do not specify the blockage of the airflow outlet other than specified in the table below. Limited models only Wind shield A 3-way air flow Wind shield C...
- Page 4 Setting the louver lock (Louver position fixing) • Fix the louver at the air flow blockage portions. (For the setting methods, follow the procedures below.) While stopping the operation, push the LOUVER (Right button) for more than 4 seconds. blinks. Push the UNIT (Left button) to select the indoor unit you desire to Unit No.