Advertisement
Install the Network Driver
This guide provides you with instructions for installing the Windows network
driver. The steps given in these instructions are for users of Windows 98.
Note: You must install the Ethernet adapter (instructions on other side
of this guide) before installing the network driver.
Before you proceed with the installation steps, decide on a name for your
network and for each PC (each name must be only one word and the name of
each PC must be different). You also need to have the Windows CD-ROM and
the NETGEAR EA101 Drivers and Diagnostics Disk ready to use in the
installation process.
Note: If the "Insert Disk" window opens and the "Please insert the
disk labeled Windows 98..." message appears at any time during the
following process, insert the Windows 98 CD-ROM in Drive D (the
CD-ROM drive) and click on "OK." Then follow the next step in the
instructions.
1. Turn on the power to the computer and start Windows 98.
The new hardware is found.
2.
Add New Hardware Wizard
This wizard searches for new drivers for:
NETGEAR EA101 USB Ethernet Adpater
A device driver is a software program that
makes a hardware device work.
Click on "Next."
Model EA101 USB Ethernet Adapter Installation Guide
< Back
Next>
Cancel
Advertisement
