Install the Network Adaptere
The Model EA101 USB Ethernet Adapter is hot swappable, which means it can
be inserted into a PC that is either turned off or powered on.
1. Insert the Model EA101 USB Ethernet Adapter into the USB (universal
serial bus) as shown in the illustration below.
Some PCs have two USB ports. The Model EA101 USB Ethernet Adapter
can be inserted into either port.
2. Insert the Category 5 10/100 Mbps UTP cable into the RJ-45 plug at the
end of the Model EA101 USB Ethernet Adapter.
Model EA101
USB Ethernet
Adapter
3. Turn on power to the PC, if you have chosen to install the adapter with
the power turned off.
Model EA101 USB Ethernet Adapter Installation Guide
9308FA