BRP Sea-Doo RXP Series Shop Manual page 220

Section 07 BODY AND HULL
Subsection 01 (BODY)
Rear Bumper
1. Remove corner bumper retaining screws.
219101005-035-028
1. Rear corner bumper retaining screws
2. Remove both corner bumpers.
219101005-035-015
3. Pull the top of bumper to unclip it from body.
206
219100893-032-008_a
TYPICAL
4. Remove rear bumper from vehicle.
Side Bumpers
1. Remove front and rear bumpers.
2. Using a marker, trace a line at bumper end.
NOTE: These marks will be used during installa-
tion.
219100893-032-009_a
1. Trace a line at end of bumper
3. Pull the top of bumper to unclip it from body.
219101039-017