Advertisement
(3) Reinstallation of the front cover
1) Insert the two fixed hooks on the
left side of the front cover 2 into the
sockets of the inverter.
10
Front cover 2
3) Tighten installation screws
on the front cover 2.
Front cover 2
2) Using the fixed hooks as supports,
securely press the front cover 2
against the inverter.
(Although installation can be done
with the operation panel mounted,
make sure that a connector is
securely fixed.
Front cover 2
4) Fix the front cover 1
with installation screws.
(The number of screws of the
front cover 1 differs according
to the capacity.)
Front cover 1
Advertisement
