ABB Infinity S Quick Start Manual page 4

QUICK START GUIDE
Two Multi-pole adapter kits are required for each multi-pole breaker - figure below.
Load Return Connections
(Bus behind Load Connections)
Load Connections
Page 4
© 2021 ABB. All rights reserved.
Move plastic slider for -48V or +24V Move plastic slider for -48V or +24V Move plastic slider for -48V or +24V
(+24V shown) (+24V shown) (+24V shown)
Upper Breaker position for -48V load Upper Breaker position for -48V load Upper Breaker position for -48V load
Lower Breaker position for +24V load Lower Breaker position for +24V load Lower Breaker position for +24V load
Multi-Pole Adapter Kits - 2 required per breaker
Correct Breaker orientation for insertion
Return Bus Adapters
Face lug studs to the rear.
Alarm Pin Alarm Pin