Cisco 6901 Manual page 6

Buttons and Hardware
Buttons and Hardware
1
2
3
4
5
6
7
Cisco Unified IP Phone
6
Handset with light strip
Paper label
Transfer button
Conference button
Hold button
Line button
Speakerphone button
Cisco Unified IP Phone
Lights up to indicate a ringing call
(flashing red) or a new voice
message (steady red).
A paper strip used to enter name
and contact numbers.
Transfers a call.
Creates a conference call.
Places an active call on hold.
Allows you to pick up a second
incoming call and to resume a held
call. The LED shows call status.
Selects the speakerphone as the
default audio path and initiates a
new call, picks up an incoming call,
or ends a call. During a call, the
button lights green. The
speakerphone audio path does not
change until you select a new audio
path (for example, by picking up
the handset).