DAWNco satellite products
1.2
MECHANICAL INSTALLATION TOOLS
HARDWARE SIZE
# 6 SCREW
1 / 4"
3 / 8"
1 / 2"
5 / 8"
3 / 4"
Also recommended for installation:
Adjustable Wrench 10"
Ratchet ( 3 / 8" drive)
Inclinometer
Compass
8' ft Ladder
Gloves
1.3
SITE SELECTION
In order to achieve maximum performance of your antenna system, it is
important to select the correct location for the antenna. The following guidelines
should be observed when selecting a site for the installation.
1.
The line of site to the satellite should be clear of any obstructions, such as
trees or buildings.
2.
The site should be relatively flat and level for ease of installation and
access to the antenna.
3.
The site should be checked for underground obstruction, such as buried
cables or pipes.
4.
All local building codes should be adhered to (i.e. grounding, foundation
requirements, zoning rules, setbacks, etc.).
1.4
FOUNDATION REQUIREMENTS
SAE WRENCH
SIZE
5/16"
7 / 16"
9 / 16"
3 / 4"
15 / 16"
1- 1 /8"
6
2.4M Az/El TRUSS MOUNT
METRIC WRENCH
SIZE
8 mm
11 mm
14 mm
20 mm
24 mm
28 mm
4096-356
MAXIMUM REC.
TORQUE
8 in-lbs
49 in-lbs
15 ft-lbs
35 ft-lbs
70 ft-lbs
220 ft-lbs