Table of Contents
Advertisement
38. The hitch on the winch is designed as a work tool and should not be used on public
roads
PTO shaft
1.
Only PTO shafts, which are prescribed by the manufacturer, can be used.
2.
Cardan protection pipes and protection funnels and connection protection must
be installed, which must be in perfect condition.
3.
With PTO shafts, be careful with prescribed pipe protection in transport and working
position.
4.
Connect and disconnect the cardan only when the cardan power take-off is
disengaged, the engine is stopped and the ignition key is removed.
5.
Always be careful to install and secure the cardan correctly.
6.
Protect the cardan protection from rotation with hang chain.
7.
Before engaging the PTO shaft on the tractor, make sure that the chosen number
of revolutions and rotation direction comply with the requirements, given in the
technical data chapter.
8.
Before engaging the PTO shaft, be careful that nobody is standing in the machine's
danger zone, which applies also to operation.
9.
PTO shaft must never be engaged, when the engine is stopped.
10.
Put the disconnected PTO shaft on the foreseen holder.
Danger area
Figure 6
Oscillating rope
Torn-off-pulley
Figure 7
7
Tow rope
Triangle
area
Pulley
Tree
Advertisement
Table of Contents
