Table of Contents
Advertisement
Diameter of the reeling machine wire rope
During the construction of the wire rope reeling machine certain parameters were
considered, which should be taken into account while using it to assure a quality lifetime
of the machine.
The radius of the wheel edge must be identical to the diameter of the wire rope. For
winches with different traction forces use the following wire ropes:
WIRE ROPE
The use of a wire rope with an improper diameter can seriously impair the functionality of
the machine. (The use of ø 11 wire rope is allowed only under certain conditions.)
If the wire rope is damaged (torn, crumpled), it is practically impossible to unreel that part
of the wire rope. In such cases complaints do not comply.
MODEL
65H
65Hpro
85H
85Hpro
(ø 11), ø 12, ø13
Figure 12a
18
Advertisement
Table of Contents
