um MAX RS 2021 Series User Manual page 41

Incorrect Fueling & Ignition , Timing adjustments
Silencer/ Exhaust System/ parts leakage
14. Lights are not illuminating
• POSSIBLE CAUSES
Ignition key is off
Battery discharge
Fuse Blown
Control switch not working
Bulb/LED fused
Loose connection
wiring harness defective
15. Head Lamp illumination not proper
• POSSIBLE CAUSES
Headlight setting disturbed
Reflector dirty/damaged
Battery discharge
Regulator output voltage is low for discharge
16. Gear shifting hard
• POSSIBLE CAUSES
Gear shift rod position incorrect
Excess play in clutch lever
Clutch plates wornout
Check and correct
Check and correct
• ACTIONS TO BE TAKEN
Keep ignition key in ON condition
It should be more than 12.4 volt, charge if required
Replace if found blown
check the continuity
Replace if fused
Ensure all the connectors are firmly connected with wiring
Check the continuity of lighting the circuit in wiring harness
• ACTIONS TO BE TAKEN
Follow the SOP for headlamp setting
Check for any damage or dark spots inside headlamp, reflector
area, replace if required
It should be more than 12.4 volt, charge if required
Check the RR unit output voltage i.e, > 13.5 V, Replace
if found Faulty
• ACTIONS TO BE TAKEN
90 degree setting of gear shift rod
Clutch lever to be adjusted
Replace clutch plates
41
USER MANUAL
UM MOTORCYCLES MAX RS 125 - 150 - 200