Korg Pa5X Performance Manual page 317

Checking which Sounds are playing
In the lowest area of various pages, an indicator shows which Sounds are playing.
This lets you see the source of the audio signal. When mixing, you can mute or
solo the various channels, and see each Sound's contribution to the overall mix.
Color Sound
Green KeyboardorPad
Orange StyleorSongfromPlayer1
Blue StyleorSongfromPlayer2
Metering the audio levels
While in the Mixer/FX
lower right side of the display.
Keep an eye on it while adjusting the volume and EQ levels, or the internal level
of the effects. The color of the bars will warn about the risk of overloading and
distort the final audio outputs.
Color Meaning
Green Audiolevelisfine.
Yellow Audiolevelisfine,butitisrunningnearthemaximum.Becarefulwhen
increasingthelevelofthechannelvolumeoranEQband,ortheinternal
volumeoftheeffects.
Red Theaudiooutputisbeingoverloaded.Ifthishappensoccasionallyonshort
peaks(likeapercussionhit),itmaystillbefine.Ifitremainstoolonginthe
red,lowerthechannelvolume,orfindtheoffendingEQbandoreffectlevel.
edit section, a stereo level meter is always visible in the
TheMixer |307