Korg Pa5X Performance Manual page 31

When using a home audio amplifier, connect the other end of the cable to the CD,
LINE IN or TAPE/AUX input of your audio system. Don't use the PHONO inputs of
your audio system!
Pa5X's AUDIO OUT
(2 x 6.35 mm / 1/4" unbalanced jacks)
Use the LEFT
>
either of them to output a mono signal. Adjust the output level with the
VOLUME slider.
Use the 1-4 connectors as separate sub-outputs. These can be used as stereo
>
sub-mixes, or as individual outputs, to process and mix individual sounds with
an external mixer or amplification system. The sounds are sent to these outputs
with the Insert FXs applied. Master FX and the MaxxAudio are deactivated. The
MASTER VOLUME
ance between the Players on these outputs. Adjust their volume with the mixer's
or external speaker's level controls.
If installed, the (optional)
main audio outputs.
and RIGHT connectors as the main stereo outputs. Connect
is not applied to these outputs. The
PaAS amplification system will work in parallel with the
Connectingtheaudiooutputs |21
Home amplification systems's LINE/AUX IN
(2 x RCA connectors)
X-FADER
MASTER
changes the bal-